Redarc Tow-Pro Elite V3 Electric Trailer Brake Controller

The REDARC Tow-Pro Elite V3 Electric Trailer Brake Controller is a 12v & 24 compatible brake controller

REDARC continues to set the benchmark in trailer brake control technology which has seen the Tow-Pro Elite remain Australia’s favourite and most trusted brake controller for 12v and 24v vehicles. For a 12v only brake controller, don't go past the Tow-Pro Elite 12, offering all of the market leading features and award winning control you need to tow your caravan, camper trailer or trailer.

The Tow-Pro Elite provides users with the ability to swap between Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode, popular for off-road driving.

This is the 3rd generation of REDARC’s Tow-Pro brake controller with the original released in June 2014 and the acclaimed Tow-Pro Elite released in September 2015.

Smooth braking capability
Continual software upgrades have been included in the Tow-Pro Elite which result in smoother braking for motorists towing the widest range of caravans, trailers, boat trailers and horse floats.

Compatible with all modern vehicles
When used with the recommended REDARC wiring kits, the Tow-Pro Elite ensures compatibility with all new vehicle technology and features Active Calibration. It works in 12V vehicles with Electric or Electric/Hydraulic trailer brakes and it works in 24V vehicles with electric brakes without the need for any additional adaptors.

For Electric/Hydraulic brakes behind 24V vehicles, it requires the EB24A adaptor. When installed as per instructions It ensures an ADR approved installation. It has also been approved by AL-KO for use with their ESC and by Dexter with their DSC systems.

Easy to install brake controller
The Tow-Pro Elite V3 features a reduction to the size and installation of the user interface (remote head). A change to the shape, length, size and depth of the remote head will allow a quicker and easier installation of the Tow-Pro Elite. It also ensures the remote head will fit into thicker and curved dashes found in modern vehicles and trucks.

Specifications

• Calibration Voltage - Output: 12VDC
• Amperage - Standby: <10mA
• Voltage - Input: 9 - 32VDC
• Amperage: 25A
• Input Fusing: 30A (Circuit Breaker)
• Output Voltage: 12VDC
• Input Voltage: 9 - 32VDC
• Brand: Redarc
• Dimensions: 85 x 100 x 30 (LxWxH)
• Weight: 200g