Yes, the roof rack includes both the platform and the rails.
We are working as fast as possible to deliver detailed step by step instructions on many of our products however, due to Covid and border restrictions our instruction writer and supplier are stuck interstate and as such we can not write instructions in detail.
Feel free to contact us on 08 8287 4748 or email@example.com and we can assist you as best as possible
Using 4x slide nuts of the M6 size, you slide them into the front rail from the underside. Affix the wind deflector in such a way that the angular side is at the front of the roof rack. When looking at the front of the vehicle it should deflect air and water toward the roof (not scoop it.) You will have to use 4x m6x25mm button head screws and an alen key to tighten.
NOTE: it is far easier to do this when not fitted to the vehicle and while the rack is upside down being assembled.
These are our complimentary awning mounts for an awning. They are attached using the m8x25mm button heads and slight nights on any side of the roof rack.
These are for sealing the gaps when mounting the rails to the vehicle.
One goes on the roof, then the rail, then the other on top. A silver washer then goes on top and is tightened down with the stainless hex bolts into the roof.
NOTE: additional sealant is advised to prevent any leaks getting through to the roof liner.
The Predator Bar is comprised to two structural metals, the foundation and winch trays are made from a carbon base steel whereas the component fascia’s are made of Alloy steel which is both strong and light weight.
Yes, the Predator Bar will work with several winches currently available on the Australian market. We have many happy customers using the Carbon Winch
The Predator Bar suits Y62 models from 2012 from STL S1 through to the current S4 models, your fitter will only have to make small adjustments to suit each variant.
For the series 5 we have a specific bar now available the Predator Evolution
The S1-4 Predator Bar weighs a total of 45kgs, making this bar the lightest bar currently available for the Y62 market.
The S5 Predator Evolution Bar, without the lights, weights 52kg.
Yes, however a lug needs to be ground off and then they can be pushed in from the back of the bar.
While we recommend that you seek the service of our approved fitters/installers in each state, should you like to do the install yourself we believe that with our instructions and support you can fit this bar at home.
DASH OffRoad currently do not stock wiring looms however this is an easy part to obtain from a 12v or auto shop.
The kit comes with x2 bellow airbags, top hat and bottom hat to suit either factory lower control arms (LCA) or billet UCA’s. Also included is airlines (braided for the exhaust side) and hardware for installation.
The recommended maximum ball weight from Nissan is 350kg. The coil delete airbags will meet and exceed the factory recommendation.
An onboard air compressor is not essential however highly recommended. Without an onboard compressor you will have to go to a local petrol station or tyre fitting outlet.
In the field testing has shown that performance is similar to a traditional coil system however comfort is increased as unlike a coil, it’s not required to be stiffer to hold the weight, just more pressure.
Yes, independent testing of brake tests and lane departure has been successfully executed by our supplier OnTrack 4x4 for the coil delete airbags.
GVM and GCM upgrades are currently awaiting approval. We envisage this to be approved be end on 2022
3.5t remains as the maximum towing weight limit as specified by Nissan.
The kit would take a medium level of skill to install yourself however to be mod plated this would need to be professionally installed.
Any air compressor has the ability to pump up the coil delete air bags however we would recommend using the DASH auto levelling kit which includes a compressor with dryer / receiver that will remove all water from the system. An airbag filled with water is not desirable.
Any change to your suspension setup will void your current GVM upgrade. You will need to again, engineer the vehicle.
The travel in the airbag ranged between -80mm to +100mm from standard height. Considerations need to be made for wheel alignment and CV angles when extreme movement is made.
Generally, comfort improves with airbag suspension and offers a soft plush ride on the rear of your Y62 Patrol/
You should consider modifying the front suspension to allow for the additional weight.
Heights can be set via pressure. This can be done manually using guard height and pressure or alternatively with the DASH auto levelling system which will have autonomous set driving height (can be programmed), a low height that is enabled by applying the hand brake, and a temporary high setting which is speed and time monitored.
This can be achieved by going to first click of the hand brake.
The DASH air gauge and mounting plate for centre console can be purchased separately to monitor the pressure of your airbags.
Airbagman Onboard Air system will allow you to change and monitor static pressures. For dynamic auto levelling you will need to upgrade the system.
You will not have the ability to get it engineered or mod plated without a mechanically controlled auto levelling system.
If a product is on backorder or pre-order the ETA will be listed under the price in the product description. Alternatively it can found at the top of the product description.
If a product does not have an ETA feel free to contact us for more details. Usually, if there is no ETA it is because we have just sold out of the item and we have not received an ETA yet from our supplier.
Yes the Roadsafe recovery points will fit the Series 5, however you will need either an Predator Evolution or ARB front bar. They do not fit with the stock bumper.
For a full list of all our instructional videos please see our INSTALL VIDEO LIBRARY.
We also have PDF instructions for some of our products which can be downloaded by clicking the pdf icon under the products main image. If you still need help with installation please contact us and we may be able to assist you.
For a full list of recommended installers please see our INSTALLER LIST. The businesses who are listed there all had previous experience with installation of the DASH OffRoad products.
For colour coding, you will need the bar with the Satin Black finish. We don’t colour code the bars, but we do have a list of recommended installers who may be able to help.
We accept the following payment methods:
- Trade account holders also can pay via Bank Deposit.
Yes, simply email us with your business details for a relevant auto fitting shop and we can set you up with a trade account on our website. Once logged in your will be able to see all your trade pricing.
Login to your DASH OffRoad account here: MY ACCOUNT
When you log in to your DASH OffRoad account you can see all your old and new orders and their current status. Select My Orders and from here you can select Track to get the tracking for your order.
When your order is ready for dispatch you will receive an automated email with the tracking details. Please note some orders may be sent in more than one shipment depending on stock availability and size of the items.
When you receive your dispatch email it will state what items have been sent and show multiple tracking numbers if sent separately.
You can also login and track your order here: MY ACCOUNT
You order will be sent within 4 days from purchase. Your order may be sent separately in some cases. Items marked as 'In Stock' will be sent to you as soon as possible and items marked as 'pre-order' or back order will be sent separately.
If items are expected to arrive from our suppliers within 7 days they may be held for up to a week to send to you in one shipment.
If an item is on backorder or pre-order it will state on the product description an approximate date for when the items will be back in stock and dispatched.
We usually pack orders Monday, Wednesday and Thursday for next day dispatch.
Please select pick up at checkout and we will contact you to let you know when your order is ready.
Our warehouse is located at:
Unit 2, 51-53 Stanbel Road,
Salisbury Plains, SA 5109
To calculate postage, in the product description input your postage and select calculate shipping.
To calculate postage for more than one item, add the products to your cart, view your cart and input your postcode and calculate shipping there.
If you have received a damaged or faulty item please contact us so we can organise a refund or replacement.
Please email firstname.lastname@example.org and include photos and a description of the issue/s.