Nissan Y62 Patrol Rear Locker Override Kit V3

The version 3 has the same functionality as V2, just smaller. This is thanks to our Aussie designed pcb module, new case and mount designed created and printed in QLD by KO Gear Australia and with the new designed interchangeable harness.

There is an ECU built into the Y62 Patrol rear differential locker that doesn't allow you to engauge itself in many situations. It turns off after speeds of 15kmph, doesn't work in high range, and many more limitations. This kit bypasses the ECU and activates the diff lock solenoid directly. When its on, it's on! When it's off, it's off! No mucking around. 


  • Allows the factory console locker switch to operate the override mode
  • The override module mounts next to factory locker control module in the Left Rear Qtr. panel of the Y62.
  • Connected using an intercept harness that plugs inbetween the factory locker module and connector.
  • Includes a Toggle switch that is design to mount on the left rear quarter vent to swap between the factory mode ('stock') and the 'override' operation modes.
  • *** No matter what mode this toggle switch is in, the locker activation is still via the Factory Selector on the console.


  • The issue with factory setting is you need to be in low range and under 7kph. (yes manual does say H4 also, but no one has got it to work in h4).
  • This allows the operation of the E-locker like any after market E-locker when the driver requires it in any drive mode and retains the console factory button function and dash light and does not throw any fault lights in doing so. Naturally common sense in usage is highly recommended.

What's included

  • KO-GEAR override module and intercept harness and toggle switch 40mm connector
  • 2x 6mm bolts ,2x flat washers, 2x spring washers
  • Mounting plate with toggle switch attached and 40mm wire connector
  • Printed Install Guide
  • 1 Year Replacement Warranty, then after individual case assessement cover.

This product is for 'Off Road" Use. Please be mindful that the 2WD and Rear Locker kits do override the STD vehicle function and or modify how the vehicle operates. Although care and attention has been taken in the products, adding them at your Y62 is at own risk. The kits are designed with fuse and component protection in mind to reduce risks, so please install well and enjoy wisely and safely.


Brand Ko-Gear
Shipping Weight 0.3000kg
Shipping Width 0.100m
Shipping Height 0.070m
Shipping Length 0.300m
Shipping Cubic 0.002100000m3

Be The First To Review This Product!

Help other DASH OffRoad users shop smarter by writing reviews for products you have purchased.

Write a product review